Re: [ic] There were errors in your last submission. They areshown in thiscolor below.

[Dorothy Puma <dorothy@digilink.net>]

I guess I must be dense!!!!  I am still not getting this to work!  I put the
below code in the authorizenet globalsub file, but still no messages are
coming up on the checkout.html. I'm obviously not a programmer and knowing
how capable Interchange is it's definately something I'm missing.  I feel
like I'm flying blind. Got any other ideas on what I might be missing???

Thanks,
Dorothy

------------
Dorothy L. Puma
System Administrator
DigiLink Internet Services
(310) 577-9450
Fax: (310) 577-3360
http://www.digilink.net
mailto:dorothy@digilink.net

> From: Mike Heins <mikeh@minivend.com>
> Reply-To: interchange-users@lists.akopia.com
> Date: Thu, 18 Jan 2001 03:21:08 -0500
> To: interchange-users@lists.akopia.com
> Subject: Re: [ic] There were errors in your last submission. They are shown in
> thiscolor below.
> 
> Quoting Ron Phipps (takedown@cdsnet.net):
>> This happens because the authorizenet module that sits in between the binary
>> and IC does not write the error back for the user to see.  This can easily
>> be modified with a line like so:
>> 
>> my $msg = errmsg("Verisign error: " . $result{RESULT} . " "
>> . " " . $result{RESPMSG} . ". Please call in your order or try again.");
>> $Vend::Session->{errors}{mv_credit_card_valid} = $msg;
>> 
>> Put this in the authorizenet module after where the module sets the
>> pop.status to 'failed'.  I'm doing this based off of the Signio module which
>> may be different although I think they were built similiarly.  This will put
>> the error message in RED right above the CC section.  I'm currently using
>> this code on 3 production sites and it works like a charm.  Next to do is
>> enable the DEBUG variable in interchange.cfg.  If the authorizenet module
>> has logdebug statements it will spit out a bunch of information in
>> /tmp/icdebug which is extremely helpful.  I used this log file to get Java
>> Verisign on an Alpha working with IC (I'll be writing a how-to soon!).  Good
>> luck!
> 
> Ron, your answer is on target as usual. And I appreciate your
> contributions on this with your HOWTO. One of the many things I don't
> seem to get to is collecting gems like that in one place. 8-\
> 
> I did something I shouldn't have done with the errmsg, by the way (if
> indeed I wrote that code; I know I wrote the original globalsub/signio
> but can't remember what the genesis was). The reason the errmsg() routine
> is used is to give access to the error locale, i.e. the call should be:
> 
> my $msg = errmsg(
> "Signio error: %s %s. Please call in your order or try again.",
> $result{RESULT} ,
> $result{RESPMSG},
> );
> 
> That way, you can add this to your locale (either the global locale.error or
> the catalog-based one, using either the locale DB or config file method):
> 
> Locale de_DE <<EOL
> "Signio error: %s %s. Please call in your order or try again."
> "Fehler Signio: %s %s. benennen bitte in Ihrer Ordnung oder versuchen noch
> einmal."
> EOL
> 
> Then, if the error occurs while the locale is de_DE, the German message
> will be spit out with proper substitution of the variable error from the
> result.  Of course that will still be in English unless Signio has locale
> substitution. 8-)
> 
> -- 
> Akopia, Inc., 131 Willow Lane, Floor 2, Oxford, OH  45056
> phone +1.513.523.7621 fax 7501 <heins@akopia.com>
> 
> Nature, to be commanded, must be obeyed. -- Francis Bacon
> 
> _______________________________________________
> Interchange-users mailing list
> Interchange-users@lists.akopia.com
> http://lists.akopia.com/mailman/listinfo/interchange-users
> 


_______________________________________________
Interchange-users mailing list
Interchange-users@lists.akopia.com
http://lists.akopia.com/mailman/listinfo/interchange-users