[Date Prev][Date Next][Thread Prev][Thread Next][Minivend by date
][Minivend by thread
]
Re: Fwd: [mv] configure: C compiler cannot create executables
On Sun, 17 Oct 1999, you wrote:
>****** message to minivend-users from "Albert A. Modderkolk" <mdd@advwebsys.com> ******
>
>Am I the only having this problem???
If I understand you correctly, the minivend ./configure script is reporting
that it is unable to create exicutables using your C compiler. If this is the
case, the first think I would do, were I you, would be to check to make sure
that you are able to compile the "hello world" program, just to check to make
sure that some intrigal part of your C system is not somehow fubar'ed.
>
>TIA, Albert
>
>==================BEGIN FORWARDED MESSAGE==================
>****** message to minivend-users from "Albert A. Modderkolk"
><mdd@advwebsys.com> ******
>
>I am running against a brick wall.... If I install minivend as root, I
>get the below errors. If I try it as mvend (owner of minivend)
>configuration stops even earlier.
>
>As you can see, I am using
>Perl 500404
>Minivend V3-14.3
>Linux 5.1
>Kernel 2.0.35
>
>I did install Minivend without any problems a few years ago... what am
>I doing wong now???
>
>Tia, Albert
>
>[root@localhost mv3143]# ./configure
>
> MiniVend Version 3.0x Configuration
>
> Copyright 1996-1998 Michael J. Heins, <mikeh@minivend.com>
>
> MiniVend is largely based on Vend 0.2
> Copyright 1995 Andrew M. Wilcox <awilcox@maine.com>
>
> Portions from Vend 0.3
> Copyright 1995, 1996 Andrew M. Wilcox <awilcox@maine.com>
>
> Distributed under the GNU General Public License, see
> the file Copying for license information.
>
>Found Perl 5.00404 as /usr/bin/perl
>
> MiniVend V3.14-3
>
> Copyright 1996-1999 by Michael J. Heins <mikeh@minivend.com>
>
> MiniVend is free under the terms of the GNU General Public License.
>
>Where is your MiniVend to be installed? [/root/mvend] /home/mv3143
>
>
>Writing Makefile for MiniVend
>Manifying ./blib/man3/Vend::FlyCat.3
>Manifying ./blib/man3/Vend::UserDB.3
>Manifying ./blib/man3/Vend::Parser.3
>Manifying ./blib/man3/Vend::ValidCC.3
>PERL_DL_NONLAZY=1 /usr/bin/perl -I./blib/arch -I./blib/lib
>-I/usr/lib/perl5/i386-linux/5.00404 -I/usr/lib/perl5 test.pl
>server.......ok 1
>socket link..ok 2
>2 tests run, all tests successful.
>Installing /home/mv3143/lib/./Vend/MakeCat.pm
>Installing /home/mv3143/lib/./Vend/Search.pm
>Installing /home/mv3143/lib/./Vend/Data.pm
>Installing /home/mv3143/lib/./Vend/Table/Update.pm
>Installing /home/mv3143/lib/./Vend/Table/DB_File.pm
>Installing /home/mv3143/lib/./Vend/Table/DummyDB.pm
>Installing /home/mv3143/lib/./Vend/Table/GDBM.pm
>Installing /home/mv3143/lib/./Vend/Table/Import.pm
>Installing /home/mv3143/lib/./Vend/Table/DBI.pm
>Installing /home/mv3143/lib/./Vend/Table/InMemory.pm
>Installing /home/mv3143/lib/./Vend/Table/Quoted.pm
>Installing /home/mv3143/lib/./Vend/TextSearch.pm
>Installing /home/mv3143/lib/./Vend/Imagemap.pm
>Installing /home/mv3143/lib/./Vend/SessionFile.pm
>Installing /home/mv3143/lib/./Vend/Session.pm
>Installing /home/mv3143/lib/./Vend/UserDB.pm
>Installing /home/mv3143/lib/./Vend/Interpolate.pm
>Installing /home/mv3143/lib/./Vend/SessionDB.pm
>Installing /home/mv3143/lib/./Vend/Config.pm
>Installing /home/mv3143/lib/./Vend/ValidCC.pm
>Installing /home/mv3143/lib/./Vend/Server.pm
>Installing /home/mv3143/lib/./Vend/Parse.pm
>Installing /home/mv3143/lib/./Vend/Order.pm
>Installing /home/mv3143/lib/./Vend/DbSearch.pm
>Installing /home/mv3143/lib/./Vend/Util.pm
>Installing /home/mv3143/lib/./Vend/Http.pm
>Installing /home/mv3143/lib/./Vend/FlyCat.pm
>Installing /home/mv3143/lib/./Vend/Scan.pm
>Installing /home/mv3143/lib/./Vend/Cart.pm
>Installing /home/mv3143/lib/./Vend/Parser.pm
>Installing /home/mv3143/lib/./Vend/PageBuild.pm
>Installing /home/mv3143/lib/./Vend/Glimpse.pm
>Installing /home/mv3143/doc/./Vend::FlyCat.3
>Installing /home/mv3143/doc/./Vend::UserDB.3
>Installing /home/mv3143/doc/./Vend::Parser.3
>Installing /home/mv3143/doc/./Vend::ValidCC.3
>Writing /home/mv3143/lib/auto/MiniVend/.packlist
>Appending installation info to /home/mv3143/lib/perllocal.pod
>/usr/bin/perl Makefile.PL install /home/mv3143/lib
>
>Entering /home/mv3143.
>
>The root user cannot run the MiniVend server for security reasons.
>
>Since you are the superuser, you must change the ownership of the
>MiniVend directory to that of the user ID that will run MiniVend.
>You may also if you wish set the group -- it will default to the
>default group of the user.
>
>User who will run MiniVend? mvend
>Group to own MiniVend? [mvend]
>
>
>Adjusting program variables and defines...done.
>creating cache ./config.cache
>checking for gcc... gcc
>checking whether the C compiler (gcc ) works... no
>configure: error: installation or configuration problem: C compiler
>cannot create executables.
>cat: syscfg: No such file or directory
>Compiling, this may take a sec...
>Configuration of link programs FAILED.
>done.
>
>That takes care of the program configuration.
>
>
>The compilation of one or both link programs (tlink and/or
>vlink) failed. You may be able to use the Perl-based tlink.pl
>program along with starting the server in INET mode (start_inet)
>to make MiniVend work.
>
>Using vlink.pl requires either that your installation use
>CGIWRAP or that you compile it with a wrapper such as the Perl
>example 'wrapsuid' program.
>
>[root@localhost mvend]# cd /home/mv3143
>[root@localhost mv3143]# vdir
>total 137
>-rw-r--r-- 1 root root 12439 Oct 8 12:43 README
>-rw-r--r-- 1 root root 7908 Oct 8 12:43 README-win.txt
>-rw-r--r-- 1 root root 3831 Oct 8 12:43 README.OS
>-rw-r--r-- 1 root root 4087 Oct 8 12:43 UPGRADE
>-rw-r--r-- 1 root root 48958 Oct 8 12:43 WHATSNEW
>drwxr-xr-x 6 mvend mvend 1024 Oct 8 12:43 admin
>drwxr-xr-x 2 root root 1024 Oct 8 12:43 bin
>-rwxr-xr-x 1 root root 1809 Oct 8 12:43 configure
>-rwxr-xr-x 1 root root 18954 Oct 8 12:43 configure.pl
>drwxr-xr-x 2 root root 1024 Oct 8 12:43 doc
>-rw-r--r-- 1 mvend mvend 0 Oct 8 12:43 error.log
>drwxr-xr-x 2 mvend mvend 1024 Oct 8 12:43 etc
>drwxr-xr-x 11 root root 1024 Oct 8 12:43 flycat
>-rw-r--r-- 1 root root 4174 Oct 8 12:43 flycat.cfg
>-rw-r--r-- 1 root root 847 Oct 8 12:43 form_mail.cfg
>drwxr-xr-x 7 root root 1024 Oct 8 12:43 lib
>-rw-r--r-- 1 root root 3792 Oct 8 12:43 locale.error
>-rw-r--r-- 1 root root 1185 Oct 8 12:43 manifest
>-rw-r--r-- 1 root root 12568 Oct 8 12:43
>minivend.cfg.dist
>drwxr-xr-x 10 root root 1024 Oct 8 12:43 simple
>drwxr-xr-x 2 root root 1024 Oct 8 12:43 src
>-rw-r--r-- 1 root root 1651 Oct 8 12:43 userdb.cfg
>
>
>
>-
>To unsubscribe from the list, DO NOT REPLY to this message. Instead,
>send
>email with 'UNSUBSCRIBE minivend-users' in the body to
>Majordomo@minivend.com.
>Archive of past messages:
>http://www.minivend.com/minivend/minivend-list
>
>===================END FORWARDED MESSAGE===================
>
>
>
>-
>To unsubscribe from the list, DO NOT REPLY to this message. Instead, send
>email with 'UNSUBSCRIBE minivend-users' in the body to Majordomo@minivend.com.
>Archive of past messages: http://www.minivend.com/minivend/minivend-list
--
========================================
Cory Trese
email : digital@specialty-books.com
fone : (740) 594 - 2274, ext 223
phax : (740) 593 - 3045
========================================
Mail Sent from
Specialty Books,
Athens Ohio, 45701
www.specialty-books.com
RedHat Linux, Hedwig
P][ / 2.3.5
========================================